Cosmetic hose production process

Production process of cosmetic hose:
tube drawing
injection head
Printing
tail sealing.
This is the basic process of hose production.
However, there are differences in specifications and specific production processes.
Here are two common production processes of cosmetic hose.
After that, you can also learn about hose production equipment and production process.

Production process of round tube cosmetic hose:

1.1 pipe drawing - draw out the hose body according to the customer's requirements and the corresponding pipe diameter and length.

Note 1.2 according to the customer's situation.

1.3.1 offset printing - 1-6 color silk screen printing, which determines the light and sanding effect according to the requirements of customers.

1.3.2 silk screen printing, bronzing and labeling - complete the silk screen printing, bronzing and labeling processes according to the requirements of the customer's design draft.

1.4 lock the cover or seal the tail: lock the cover or seal the tail according to the customer's requirements.

1.5 completion inspection - inspect product quality. Ensure 100% factory quality.

1.6 packaging - according to the customer's packaging requirements, the packaging leaves the factory.

Oval cosmetic hose production process:

2.1 pipe drawing - draw out the hose body according to the customer's requirements and the corresponding pipe diameter and length.

2.2.1 shoulder less offset printing - 1-6 color silk screen printing. According to the customer's requirements, determine the bright and frosting effect.

2.2.2 shoulder free silk screen printing, bronzing and labeling - complete the silk screen printing, bronzing and labeling processes according to the requirements of the customer's design draft.

2.3 note shoulder - note the corresponding shoulder according to the customer's cover configuration.

2.4 lock the cover or seal the tail: lock the cover or seal the tail according to the customer's requirements.

2.5 completion inspection - inspect the product quality. Ensure 100% factory quality.

2.6 packaging - according to the customer's packaging requirements, the packaging leaves the factory.